Problem with kixtart and NT4.0 - KiXtart.org - official site

You are not logged in. [Log In] KiXtart.org website » Forums » KiXtart » Advanced Scripting » Problem with kixtart and NT4.0

Page 8 of 9

8

Topic Options

#73597 - 2003-03-05 05:53 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	Ok yes the 98 client is falling into that limitation. I don't know if it is worth trying to map it with the shorter share name that gets cutoff like with long filenames in dos. If I decide to not worry about 98 clients altogether how is that going to affect everyone else. The problem is I don't know how many 98 clients there are, probably only a small few. But if I run that utility that was created for me to run one time to set the logon script to users in an OU, the chances are that it may end up being a 98 client and I don't want them to be screwed up. It would be nice if there was a way for the script to detect a 98 client and just not run at all regardless if they had a logon.bat assigned to their user account.
Top

#73598 - 2003-03-05 05:56 PM Re: Problem with kixtart and NT4.0
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	The easiest and best solution is for you to correct the long share and group names. Shares can be easily changed and the groups can be renamed via script. [ 05. March 2003, 17:57: Message edited by: Howard Bullock ] _________________________ Home page: http://www.kixhelp.com/hb/
Top

#73599 - 2003-03-05 05:56 PM Re: Problem with kixtart and NT4.0
Sealeopard Sealeopard KiX Master Registered: 2001-04-25 Posts: 11164 Loc: Boston, MA, USA	I have to agree with Howard on this one. Oh, man, why not take a look at the KiXtart Manual? You could for example take a look at the macros section. Alternatively, take a look at e.g. my signature, which will laso give you a lot of resources. Or take a look at the OSID() UDF in the UDF forum. So, why not sit down for an hour and go through all the resources we've provided to you? [ 05. March 2003, 17:58: Message edited by: sealeopard ] _________________________ There are two types of vessels, submarines and targets.
Top

#73600 - 2003-03-05 05:58 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	Actually when I ran only that piece of code you posted I get this: 0 - The operation completed successfully. InGroup() = 0
Top

#73601 - 2003-03-05 06:01 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	If it was possible to actually pay someone to write the damn script for me I would but I can't. I am basically finished and my boss is saying not to worry about the 98 clients but I don't want to hose them up if it just isn't going to work. What about that code result I posted? That was run on the 98 box.
Top

#73602 - 2003-03-05 06:01 PM Re: Problem with kixtart and NT4.0
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	Which would indicate that the user is NOT a member of the group. Is that what you expected? Is the group name correct? The two different test scripts show different group names. [ 05. March 2003, 18:02: Message edited by: Howard Bullock ] _________________________ Home page: http://www.kixhelp.com/hb/
Top

#73603 - 2003-03-05 06:02 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	I am so so greatful for the help I have received up to this point. Everything I have done is basically due to the help of you guys and that is fantastic thank you.
Top

#73604 - 2003-03-05 06:02 PM Re: Problem with kixtart and NT4.0
Sealeopard Sealeopard KiX Master Registered: 2001-04-25 Posts: 11164 Loc: Boston, MA, USA	Read the Manual! code: IF @INWIN=1 ; Windows NT/2000/XP ELSE ; Windows 95/98/ME ENDIF _________________________ There are two types of vessels, submarines and targets.
Top

#73605 - 2003-03-05 06:05 PM Re: Problem with kixtart and NT4.0
Sealeopard Sealeopard KiX Master Registered: 2001-04-25 Posts: 11164 Loc: Boston, MA, USA	Actually, a '0' would also be returned if you're outside the goup name length limts, I believe. Thus, the INGROUP() is actually working as expected. However the group names are way too long and should be shortened. Just excluding Windows 9x clients is a workaround and shouldn't really be done. Fix the underlying problem, don't cure the symptoms. This way, you end up with a well-documented and correctly setup network. _________________________ There are two types of vessels, submarines and targets.
Top

#73606 - 2003-03-05 06:08 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	Well we are not going to be able to change the share names because there are people currently using them the way they are and we are not ready to go live with this script domain wide yet. My boss/network administration says he really doesn't care about the script running on the 98 clients. I ran that code ? "The value of InGroup(Mapping And Addressing) is : " + InGroup('Mapping And Addressing') and i got a result of = 1 I change the And to & and got a result of = 0 I believe the actual group name in AD is Mapping & Addressing.
Top

#73607 - 2003-03-05 06:14 PM Re: Problem with kixtart and NT4.0
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	A value of one (1) indicates the user is a member of the group. I think you need to get a better grip on what the group names actually are so that your script works as expected. The "AND" was copied from one of your posts. [ 05. March 2003, 18:14: Message edited by: Howard Bullock ] _________________________ Home page: http://www.kixhelp.com/hb/
Top

#73608 - 2003-03-05 06:16 PM Re: Problem with kixtart and NT4.0
Howard Bullock Howard Bullock KiX Supporter Registered: 2000-09-15 Posts: 5809 Loc: Harrisburg, PA USA	I still have no clue if you were successful or not with this test on the Win98 computer. You mentioned that you were affected by the limitation then you post your last item saying that my script returned a (1) meaning it worked. Where did it work? Where did it fail if at all. We are getting nowhere fast. [ 05. March 2003, 18:17: Message edited by: Howard Bullock ] _________________________ Home page: http://www.kixhelp.com/hb/
Top

#73609 - 2003-03-05 06:17 PM Re: Problem with kixtart and NT4.0
Sealeopard Sealeopard KiX Master Registered: 2001-04-25 Posts: 11164 Loc: Boston, MA, USA	The '#', '$', and '&' are special characters and should not be used under Windows 9x in computer names and/or group names. _________________________ There are two types of vessels, submarines and targets.
Top

#73610 - 2003-03-05 06:19 PM Re: Problem with kixtart and NT4.0
Jack Lothian Jack Lothian MM club member Registered: 1999-10-22 Posts: 1169 Loc: Ottawa,Ontario, Canada	It is not just shares that is being talked about here it is the group names. I believe your long group names will not work on all DOS/Win9x/ME/NT clients. NT Servers do not like long group names either. Your organization shouldn't have created such long group names. I agree with jens & Howard you should rectify the underlying problem. [ 05. March 2003, 18:23: Message edited by: Jack Lothian ] _________________________ Jack
Top

#73611 - 2003-03-05 06:22 PM Re: Problem with kixtart and NT4.0
Sealeopard Sealeopard KiX Master Registered: 2001-04-25 Posts: 11164 Loc: Boston, MA, USA	I'm actually surprised that this is not part of the MCDBA/MCSA exams. _________________________ There are two types of vessels, submarines and targets.
Top

#73612 - 2003-03-05 06:25 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	Ok to recap this. I the group name in AD IS in fact Mapping & Addressing, it returns a result of 0 on my XP box and my 98 box.
Top

#73613 - 2003-03-05 06:26 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	And on the NT4 box everything works fine now so I guess whatever. You guys have been patient up to this point but now you are getting to be rude. As for the MCDBA/MCSA exam remark, Kixtart isn't even mentioned.
Top

#73614 - 2003-03-05 06:30 PM Re: Problem with kixtart and NT4.0
Sealeopard Sealeopard KiX Master Registered: 2001-04-25 Posts: 11164 Loc: Boston, MA, USA	Replace the '&' ampersand with the 'And' and try to avoid special characters in shares/groupnames/usernames/computernames/DNS. However, I meant e.g. group limitations, not KiXtart. Also, be aware that if you assing a user to a group without refreshing the Kixtart token cache (Windows Nt/2000/XP only), that KiXtart might not detect the new group assignment. Please see the KiXtart Manual for ways to refresh the token cache. _________________________ There are two types of vessels, submarines and targets.
Top

#73615 - 2003-03-05 06:33 PM Re: Problem with kixtart and NT4.0
DJ Ballistic DJ Ballistic Starting to like KiXtart Registered: 2003-02-21 Posts: 185	Ok someone at my location is messing with me. Geez, ok the group name is Mapping And Addressing not the Ampersand. Grief as if I am not stressed enough already.
Top

#73616 - 2003-03-05 06:35 PM Re: Problem with kixtart and NT4.0
Jack Lothian Jack Lothian MM club member Registered: 1999-10-22 Posts: 1169 Loc: Ottawa,Ontario, Canada	DJ, Howard & Jens have been very patient & as volunteers they have given you a lot of their free time. I don't see anything rude in their posts. They have shown a little annoyance occasional maybe but never rude. Your question style is rather abrupt & you tend to assume we know more about your circumstances than we do which tends to make responding difficult. I think frustration arises because of this difficulty. Try to be patient & give details. Make each post more detailed instead of feeding the info a little piece at a time in different posts. _________________________ Jack
Top

Page 8 of 9

8

Previous Topic

Previous Topic View All Topics

View All Topics

Index Next Topic

Next Topic

Moderator: Glenn Barnas, NTDOC, Arend_, Jochen, Radimus, Allen, ShaneEP, Ruud van Velsen, Mart

Hop to:

Shout Box

Who's Online

0 registered and 833 anonymous users online.

Newest Members

Timothy, Jojo67, MaikSimon, kvn317, kixtarts2025
17874 Registered Users

Generated in 0.083 seconds in which 0.032 seconds were spent on a total of 12 queries. Zlib compression enabled.

click tracking