code:

---

       IF 1 <> EXIST($windir+"\Outlook.PRF")
             COPY @ldrive+"PROFGEN\RBMG\Outlook2000\Outlook.PRF" $windir
       ENDIF
       IF 1 <> EXIST ($windir+"\Profgen.exe")
             COPY @ldrive+"PROFGEN\RBMG\Outlook2000\Profgen.exe" $windir
       ENDIF
       IF 1 <> EXIST ($windir+"\NEWPROF.EXE")
             COPY @ldrive+"PROFGEN\RBMG\Outlook2000\NEWPROF.EXE" $windir
       ENDIF
       IF EXIST ($windir+"\FixPrf.EXE")
             DEL $windir+"\FixPrf.EXE"
       ENDIF
       IF EXIST($systemdrive+"PROFGEN.exe")
             DEL $systemdrive+"PROFGEN.EXE"
       ENDIF
       IF EXIST($systemdrive+"NEWPROF.EXE")
             DEL $systemdrive+"NEWPROF.EXE"
       ENDIF

---

code:

---

 ;BREAK ON
 ;CLS
 ; -- Outlook 98/2000/XP Configuration
 ; -- Kent Dyer
 ; -- Updated 15-October - 2002
 ; -- Tested with Kixtart - 3.63, 4.10, 4.02
 ; -- Test Environments - NT 4.0, W2k, WXP
 ; -- Used some ideas from MCA's KIXnnnUPDATE.EXE script
 ; -- Visit: http://home.wanadoo.nl/scripting/
 ; -- Originally created 15-August-2001
 ; -- http://kixtart.org/board/ultimatebb.php?ubb=get_topic;f=10;t=000021
 ; -- This completes the setup of Outlook
 ; -- Yes, you can use PROFGEN and FIXPRF, but these alone don't complete the setup
 ; -- They are, however necessary to complete this piece of the script
 ; -- Key points:
 ; -- * Changes the view to get rid of the Outlook Bar and show the "Explorer View" (optionally set)
 ; -- * Checks the box to empty deleted items on leaving Outlook (optionally set)
 ; -- * Also deletes bogus profiles like OEM User, etc. (optionally set)
 ; -- Changes Necessary:
 ; -- >>>> Company key needs to be changed to yours....
 ; -- Comments and feedback are welcome to - dyerkb@myrealbox.com
 ; -- 27-August-2001 - Fixed Registry Key problem, CHKEXCHG.EXE - Not required
 ; -- 17-February-2002 - Added in compatibility for Windows 9x
 ; -- 12-March-2002 - Added Ability to turn on/off empty deleted items on exit and removal of bogus profiles
 ; -- 18-July-2002 - Added in the ability to configure Outlook XP, updated Micrsoft Links
 ; -- 15-August-2002 - Fixed detection problem, 0 = EXISTKEY with an OR Statment bombs on 3.63
 ; -- 19-August-2002 - Increased testing with EXISTKEY and related changes
 ; -- 26-September-2002 - "Locked Down" user could not write to %windir%, created a C:\Scripts folder
 ; -- 03-October-2002 - Added in key to look for "MS Exchange Settings" as well as @userid
 ; -- 15-October-2002 - Re-Implemented FIXPRF.EXE for PROFILE Generation corrections
 ; -- 15-October-2002 - FIXPRF.EXE also is needed for generating the profile for Outlook XP as well
 ; -- 15-October-2002 - Quieted Profgen with a re-direct to nul - "> nul"
 ; -- 15-October-2002 - Completed Testing with Windows 9x
 ; -- 15-October-2002 - Use of more variables, changed @ldrive to @lserver for Win9x
 ; -- 15-October-2002 - Removed the Need for Winset, Putinenv for Windows 9x
 ; --- ****  The following Resources were used in this composition ****
 ; --- &&&& URLS/Links updated and verified on 03 - October - 2002 &&&& ---
 ; -- http://www.microsoft.com/office/ork/2000/download/Outlook.prf - sample PRF file
 ; -- http://support.microsoft.com/default.aspx?scid=kb;EN-US;q182035 - Windows 95 roving users setup
 ; -- ftp://ftp.microsoft.com/bussys/exchange/exchange-unsup-ed/profgen.zip - Contains PROFGEN.EXE
 ; -- Automate Outlook Profile Creation Using PRFPATCH:
 ; -- http://www.microsoft.com/technet/archive/default.asp?url=/TechNet/archive/office/office97/deploy/prfpatch.asp
 ; -- http://www.microsoft.com/technet/downloads/exe/profile.exe - PRFPATCH.EXE, sample PRF File
 ; -- http://support.microsoft.com/default.aspx?scid=kb;EN-US;Q145905 - NEWPROF command-line options
 ; -- http://www.microsoft.com/office/ork/appa/appa.htm - Microsoft Office 97 Resource Kit Tools and Utilities page
 ; -- http://www.microsoft.com/ntworkstation/downloads/Recommended/Featured/NTZAK.asp - Zero Administration Kit HomePage
 ; -- http://www.microsoft.com/ntworkstation/downloads/bin/zak/zak.exe - Download ZAK, Contains FIXPRF.EXE
 ; -- http://www.microsoft.com/office/ork/xp/journ/adminup.htm#Off2000
 ; --- ****  Outlook XP ****
 ; -- You can use GPO Editor for deployment of Outlook XP
 ; -- You should be able to issue the following command line: outlook.exe /importprf \\server1\share\outlook.prf
 ; -- Ref. http://www.microsoft.com/technet/treeview/default.asp?url=/TechNet/prodtechnol/office/officexp/reskit/officexp/part5/c18dpou.asp
 ; -- Look under: "Customizing an Outlook Installation"
 ; -- Outlook 2002 (Outlook XP) - http://www.slipstick.com/outlook/ol2002.htm
 ; -- D:\PFILES\COMMON\SYSTEM\MAPI\1033\95\NEWPROF.EXE - Office 2000 CD
 ; -- D:\PFILES\COMMON\SYSTEM\MAPI\1033\NT\NEWPROF.EXE - Office 2000 CD

 ; -- Program Settings, change as needed
 $profile_remove = "No" ; -- Profiles other than @USERID, like OEM User, MS Exchange Settings, etc. removed
 $deleteitems = "No" ; -- Do you want your users to delete all deleted items on Exit from Outlook?
 $explorview = "Yes" ; -- Do you want your users to view the "Explorer View" and not the Outlook bar in Outlook?
 $serverloc = @lserver+"\Netlogon\Profgen\Outlook2000" ; -- Server Location

 ; -- Environment variables
 $exchangeserver = "EXCHANGESERVER" ; -- Exchange 2000, should go to any Exchange server and re-direct as needed
 $prf = "Outlook.prf" ; -- PRF file

 IF (@inwin = 1) ; -- Is it Winnt or 2K?
       ; -- Windows NT Registry Locations
       $profilelocation = "HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles"
       $windir = READVALUE("HKEY_LOCAL_MACHINE\Software\Microsoft\Windows NT\CurrentVersion","SystemRoot")
 ELSE
       ; -- Windows 9x Registry Locations
       $profilelocation = "HKEY_CURRENT_USER\Software\Microsoft\Windows Messaging Subsystem\Profiles"
       $windir = READVALUE("HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion","SystemRoot")
 ENDIF

 $systemdrive = SUBSTR($windir,1,2) ; -- This will show C: or M: or what drive windows is installed on
 $scriptdir = $systemdrive+"\Scripts" ; -- Script Directory
 $prffile = $scriptdir+"\"+$prf ; -- Shows c:\scripts\outlook.prf, for example
 ; -- 19-August-2002 - Fixed detection problem, 0 = EXISTKEY with an OR Statment bombs on 3.63
 ; -- Thanks to MCA for the KixtartnnnUpdate.EXE script for this info
 ; -- You can find these at - http://home.wanadoo.nl/scripting/
 $ppru = $profilelocation+"\"+@userid
 ; -- 03-October-2002 - Added in key to look for "MS Exchange Settings"
 $mses = $profilelocation+"\MS Exchange Settings"
 IF (ExistKey($ppru) = 0) OR (ExistKey($mses) = 0)
       RETURN ; -- Profile exists and return
 ELSE
       $exe = ReadValue("HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\App Paths\OUTLOOK.EXE","")
       $ver = GetFileVersion($exe)  ; -- Get version of executable for MS-Outlook
       $pos_locat = INSTR($ver, ".") - 1 ; - Look for where the dot is
       $verchk = SUBSTR($ver,1,$pos_locat)

       ; -- Check to insure that the scripts folder is there
       ; -- 26-September-2002 - Found an issue with "Locked Down" user that could not write to %windir%
       IF GETFILEATTR($scriptdir) & 16
       ELSE
             SHELL "%comspec% /c md "+$scriptdir
       ENDIF

       ; -- Before we begin, let's insure all needed files are in place

       ;IF 1 <> EXIST($windir+"\Outlook.PRF")
       ; -- Kent Dyer - 09/26/02 - Copy each time
       COPY $serverloc+"\"+$prf $scriptdir
       ;ENDIF
       IF 1 <> EXIST ($scriptdir+"\Profgen.exe")
             COPY $serverloc+"\Profgen.exe" $scriptdir
       ENDIF
       IF 1 <> EXIST ($scriptdir+"\NEWPROF.EXE")
             COPY $serverloc+"\NEWPROF.EXE" $scriptdir
       ENDIF
       IF 1 <> EXIST ($scriptdir+"\FIXPRF.EXE")
             COPY $serverloc+"\FIXPRF.EXE" $scriptdir
       ENDIF

       ; -- Depending on the version ($ver) detected above, go to the appropriate process
       SELECT
       CASE
             $verchk = "8" ; -- If it is Outlook 98, configure the following keys and values (e.g. 8.5.5104.0)
             IF $profile_remove = "YES"   ; -- If it does not exist, delete out any odd-ball Profiles
                   $index = 0
:loop3
                   $keyname = ENUMKEY($profilelocation, $index)
                   IF @error = 0
                         ;? "Name found: $KeyName" ; -- Uncomment for debugging
                         IF $keyname <> @userid OR $keyname <> "Sales" ; -- Going to check for @userid
                               $rc = DELTREE($profilelocation+"\"+$keyname)
                               ;$RC = DELKEY($ProfileLocation, $KeyName)
                               $index = $index + 1
                               GOTO Loop3
                         ENDIF
                   ENDIF
             ENDIF
             ;SHELL "%COMSPEC% /C "+$ScriptDir+"\Fixprf.exe "+$prfFile @userid @userid $ExchangeServer
             SHELL "%COMSPEC% /C "+$scriptdir+"\Fixprf.exe "+$prffile+" @userid @userid "+$exchangeserver
             SLEEP 1
             IF (@inwin = 1) ; -- Is it Winnt or 2K?
                   SHELL "%COMSPEC% /C "+$systemdrive+"\Scripts\Profgen.exe "+$systemdrive+"\Scripts\Newprof.exe -p "+$prffile+" -N -R -L > nul"
             ELSE
                   ; -- Removed Profgen as it kills Windows 9x
                   SHELL "%COMSPEC% /C "+$systemdrive+"\Scripts\Newprof.exe -p "+$prffile+" -N -R -L > nul"
             ENDIF
             ; -- If you use RUN instead of SHELL, the script will pause and not complete properly
             ;SHELL "%COMSPEC% /C "+$systemdrive+"\Scripts\Profgen.exe "+$systemdrive+"\Scripts\NEWPROF.EXE -P "+$prfFile+" > nul"
             SLEEP 1
             $rc = writevalue($profilelocation, "DefaultProfile", @userid, "REG_SZ")
             RETURN
       CASE
             $verchk = "9" ; -- If it is Outlook 2000, configure the following keys and values (e.g. 9.0.0.2416)
             IF $profile_remove = "YES"  ; -- If it does not exist, delete out any odd-ball Profiles
                   $index = 0
:loop4
                   $keyname = ENUMKEY($profilelocation, $index)
                   IF @error = 0
                         ;? "Name found: $KeyName" ; -- Uncomment for debugging
                         IF $keyname <> @userid OR $keyname <> "Sales" ; -- Going to check for @userid
                               $rc = DELTREE($profilelocation+"\"+$keyname)
                               ;$RC = DELKEY($ProfileLocation, $KeyName)
                               $index = $index + 1
                               GOTO Loop4
                         ENDIF
                   ENDIF
             ENDIF
             ; -- Generate the Inbox
             SHELL "%COMSPEC% /C "+$scriptdir+"\Fixprf.exe "+$prffile+" @userid @userid "+$exchangeserver
             SLEEP 1
             IF (@inwin = 1) ; -- Is it Winnt or 2K?
                   SHELL "%COMSPEC% /C "+$scriptdir+"\Profgen.exe "+$scriptdir+"\Newprof.exe -p "+$prffile+" -N -R -L > nul"
             ELSE
                   SLEEP 1
                   ; -- Removed Profgen as it kills Windows 9x
                   SHELL "%COMSPEC% /C "+$scriptdir+"\Newprof.exe -p "+$prffile+" -N -R -L > nul"
             ENDIF
             ; -- If you use RUN instead of SHELL, the script will pause and not complete properly
             ;SHELL "%COMSPEC% /C "+$ScriptDir+"\Profgen.exe "+$ScriptDir+"\NEWPROF.EXE -P "+$prfFile+" > nul"
             ; -- Had to add a small pause
             SLEEP 1
             $rc = writevalue($profilelocation, "DefaultProfile", @userid, "REG_SZ")

             ; -- Check for the Default profile, if it does not exist, create it
             IF @userid <> READVALUE( $profilelocation, "DefaultProfile" )
                   $rc = WRITEVALUE ($profilelocation, "DefaultProfile", @userid, "REG_SZ")
             ENDIF

             ; -- Check the box to empty deleted items on leaving Outlook - Now the we have the Outlook Profile Generated
             ; -- Note: $mses should not come into play here as "MS Exchange Settings" would indicate that this mailbox has
             ; -- already been completed
             IF $deleteitems = "Yes"
                   IF "0100" <> READVALUE($ppru+"\0a0d020000000000c000000000000046","000b0115")
                         $rc = WRITEVALUE($ppru+"\0a0d020000000000c000000000000046","000b0115","0100","REG_BINARY")
                   ENDIF
             ENDIF

             ; -- Changes the view to get rid of the Outlook Bar and show the "Explorer View"
             IF $explorview = "Yes"

                   ; -- CHECK FOR KEYS AND IF NEED BE, ADD THEM
                   ; --- Check for the right keys
                   IF 0 <> EXISTKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0")
                         $rc = ADDKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0")
                         $rc = ADDKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Common")
                         $rc = ADDKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Common")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Common")
                         $rc = ADDKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Common")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Preferences")
                         $rc = ADDKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Preferences")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Common\UserInfo")
                         $rc = ADDKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Common\UserInfo")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook")
                         $rc = ADDKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Options")
                         $rc = ADDKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Options")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Options\Mail")
                         $rc = ADDKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Options\Mail")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook\Setup")
                         $rc = ADDKEY("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook\Setup")
                   ENDIF
                   IF 0 <> EXISTKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Office Explorer")
                         $rc = ADDKEY("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Office Explorer")
                   ENDIF

                   ; -- Set the Machine Name
                   IF @wksta <> READVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook","Machine Name")
                         $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook","Machine Name",@wksta,"REG_SZ")
                   ENDIF
                   ; -- Check Internet E-Mail Accounts
                   IF 1 <> READVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook","CheckInternetAccounts")
                         $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook","CheckInternetAccounts","1","REG_DWORD")
                   ENDIF
                   ; -- Has Outlook been Setup?
                   IF "False" <> READVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook","FirstRunDialog")
                         $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook","FirstRunDialog","False","REG_SZ")
                   ENDIF
                   ; -- Primary Client?
                   IF 1 <> READVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Setup","PrimaryClient")
                         $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Setup","PrimaryClient","1","REG_DWORD")
                   ENDIF
                   ; -- Corporate or POP3? - Needs to be a machine setting
                   IF 1 <> READVALUE("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook\Setup","MailSupport")
                         $rc = WRITEVALUE("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook\Setup","MailSupport","1","REG_DWORD")
                   ENDIF
                   ; -- Corporate or POP3? - Needs to be a machine setting
                   IF 1 <> READVALUE("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook\Setup","First-Run")
                         $rc = WRITEVALUE("HKEY_LOCAL_MACHINE\Software\Microsoft\Office\9.0\Outlook\Setup","First-Run","df83b12adc9cd511b57c0002a57ce19c","REG_BINARY")
                   ENDIF

                   ; -- Set the default mail preference as Rich Text format 1996609 is Word, 199610 Rich Text Format
                   IF "196610" <> READVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Options\Mail","EditorPreference")
                         $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Options\Mail","EditorPreference","196610","REG_DWORD")
                   ENDIF

                   $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows Messaging Subsystem\Profiles\"+@userid+"\0a0d020000000000c000000000000046","001e0360","","REG_SZ")

                   ; -- Changes the view to get rid of the Outlook Bar and show the "Explorer View"
                   $expview = "010000002c0000000200000003000000ffffffffffffffffffffffffffffffff62000000270000003"
                   $expview = $expview + "c030000ac02000001000000000000000100000000000000c00000006400000003000000"
                   $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Office Explorer","Frame",$expview,"REG_BINARY")

                   ; -- Set the default Font to be Verdana 10 pt
                   $pltextfont = "3c0000000f0000e800000040c80000000600000000000000002056657264616e6100020000000000000000"
                   $pltextfont = $pltextfont + "0000000000201a493a38e9070001000000"
                   $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\9.0\Outlook\Preferences","PlainTextFont",$pltextfont,"REG_BINARY")
             ENDIF
             RETURN
       CASE
             $verchk = "10" ; -- If it is Outlook XP, configure the following keys and values

             ; -- This is discussed at: http://www.slipstick.com/outlook/ol2002/prftips.htm
             IF "NO" <> READPROFILESTRING($prffile,"General","BackupProfile")
                   $rc = WRITEPROFILESTRING($prffile,"General","BackupProfile","NO")
             ENDIF

             ; -- This is discussed at the bottom of - http://www.microsoft.com/office/ork/xp/four/outc03.htm
             $rc=WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Setup","ImportPRF",$winntfile,"REG_SZ")

             ; -- Change the PRF file from %username% to @userid
             IF @userid <> READPROFILESTRING($prffile,"General","ProfileName")
                   $rc = WRITEPROFILESTRING($prffile,"General","ProfileName",@userid)
             ENDIF

             ; -- Fix the Profile
             SHELL "%COMSPEC% /C "+$scriptdir+"\Fixprf.exe "+$prffile+" @userid @userid "+$exchangeserver
             SLEEP 1
             RUN $exe+" /importprf "+$prffile ; -- Import the profile for outlook
             SLEEP 1

             ; -- Set the default mail preference as Rich Text format 1996609 is Word, 199610 Rich Text Format
             IF "196610" <> READVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Options\Mail","EditorPreference")
                   $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Options\Mail","EditorPreference","196610","REG_DWORD")
             ENDIF

             ; -- Set the default Font to be Verdana 10 pt
             $pltextfont = "3c0000000f0000e800000040c80000000600000000000000002056657264616e6100020000000000000000"
             $pltextfont = $pltextfont + "0000000000201a493a38e9070001000000"
             $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Preferences","TextFontSimple",$pltextfont,"REG_BINARY")

             ; -- Changes the view to get rid of the Outlook Bar and show the "Explorer View"
             IF $explorview = "Yes"
                   $expview = "010000002c0000000200000003000000ffffffffffffffffffffffffffffffff2c0000002c00000084"
                   $expview = $expview + "020000dc01000001000000000000000100000000000000c0000000640000001800000003000000"
                   $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Office Explorer","Frame",$expview,"REG_BINARY")
             ENDIF

             ; -- Check the box to empty deleted items on leaving Outlook - Now that we have the Outlook Profile Generated
             IF $deleteitems = "Yes"
                   IF "1" <> READVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Preferences","EmptyTrash")
                         $rc = WRITEVALUE("HKEY_CURRENT_USER\Software\Microsoft\Office\10.0\Outlook\Preferences","EmptyTrash","1","REG_DWORD")
                   ENDIF
             ENDIF

             RETURN
       ENDSELECT
 ENDIF

---

• Re-Implemented FIXPRF.EXE for PROFILE Generation corrections
• FIXPRF.EXE also is needed for generating the profile for Outlook XP as well
• Quieted Profgen with a re-direct to nul - "> nul"
• Outlook XP Testing - Completed
• Windows 9x Testing - Completed
• Use of more variables, changed @ldrive to @lserver for Win9x
• Removed the Need for Winset, Putinenv for Windows 9x