#24434 - 2002-07-05 04:19 AM
batch file not executing under w2k
|
Dwayne
Fresh Scripter
Registered: 2002-07-05
Posts: 6
|
Hi,
We've recently started using kixtart - and i can get all the basic functions to work fine (such as mapping drives, etc) - however i'm having real problems trying to get an executable to run when a user logons using a group policy (we're on W2k)
Scenario:
We're trying to do an updated installation of the notes 5.0.10 client. The unattended installation works fine when run manually - but when i get it to try and launch using kixstart its seems to run but nothing happens.
I've tried using both the run and shell command, creating a batch file, or running the setup directly. Now i can get the kix script to run fine if i do it manually after logging on (by mapping to the netlogon share and running kix manually) but again if i try to use a policy nothing happens - though i can see the script running - and i use the -d switch i can parse through the script but then nothing happens.
Our script at the moment looks like this
(this is just a basic version until i can get it working)
cls
copy "\\%server%\software\Notesr5-10\Clients\notessetup.bat" "c:\lotus\"
run "c:\lotus\notessetup.bat"
and the bat file has this line
\\%server%\software\Notesr5-10\Clients\Setup.exe -s -f1 setup.iss
again it works fine if i run the kix script manually - just not while logging on...
any suggestions would be great...
[ 05 July 2002, 04:26: Message edited by: Dwayne ]
|
|
Top
|
|
|
|
|
#24435 - 2002-07-05 07:29 AM
Re: batch file not executing under w2k
|
NTDOC
Administrator
Registered: 2000-07-28
Posts: 11624
Loc: CA
|
Hello Dwayne and welcome to the board.
The batch file is the problem... I think
Try putting a PAUSE in the batch to see if it is even running.
However, you don't even need to copy or use the batch file. If you want to run that command you can run it from KiXtart.
Try something like this...
code:
$RunNotes='"\\%server%\software\Notesr5-10\Clients\Setup.exe -s -f1 setup.iss"'
RUN $RunNotes
|
|
Top
|
|
|
|
#24440 - 2002-07-07 09:34 PM
Re: batch file not executing under w2k
|
Dwayne
Fresh Scripter
Registered: 2002-07-05
Posts: 6
|
Thanks for the replies guys - just to answer some of the questions
1) the permissions are ok - the user account i'm using is a local power user (it has install rights - had fun with that one!) - plus once you've logged on the script runs fine if run manually (running kix32 manually)
2) the %server% is just the server name - (i'm actually using the server name in there not the %server% variable
I'll switch back to using the run command again and see what happens - it seems to be that in the logon process it stops the command from executing - as when you run the command manually there is a distinct pause before it runs - so i was wondering if during the logon process it gets cutoff somehow - i might try and use a sleep statement to get it past some of the logon stage...
i'll post the results! :-)
|
|
Top
|
|
|
|
|
#24443 - 2002-07-08 10:24 PM
Re: batch file not executing under w2k
|
Dwayne
Fresh Scripter
Registered: 2002-07-05
Posts: 6
|
Thanks for those suggestions guys - still no go unfortunately - i even tried mapping a drive and running it from that...
again it all works when i wait till the use has logged on and then run kix manually - its like the command itself isn't running (even trying to get it to log won't work)
now i'm starting to think whether its something we have running at startup (like antivirus software) that is stopping the executable from running
|
|
Top
|
|
|
|
|
#24444 - 2002-07-08 11:18 PM
Re: batch file not executing under w2k
|
Radimus
Moderator
Registered: 2000-01-06
Posts: 5187
Loc: Tampa, FL
|
the problem may also be the setup.iss.
Not the iss file itself but that it cannot resolve the path to it.
Give it the full path and see...
|
|
Top
|
|
|
|
|
#24446 - 2002-07-08 11:30 PM
Re: batch file not executing under w2k
|
Radimus
Moderator
Registered: 2000-01-06
Posts: 5187
Loc: Tampa, FL
|
ohhh and use Shell instead of Run
|
|
Top
|
|
|
|
|
#24447 - 2002-07-08 11:47 PM
Re: batch file not executing under w2k
|
Dwayne
Fresh Scripter
Registered: 2002-07-05
Posts: 6
|
gave it a whirl - still no guy - though again if i run the script manually after logging on (i map a drive to the netlogon share and then just use the kix32 installnotes.kix command) it works perfectly...
|
|
Top
|
|
|
|
#24448 - 2002-07-10 05:30 AM
Re: batch file not executing under w2k
|
Dwayne
Fresh Scripter
Registered: 2002-07-05
Posts: 6
|
Hi Guys,
Thought i'd post an update - FINALLY found what the problem was - there was another policy that applied that stated that the logon scripts should be run synchronously - i changed it to 'not configured' changed the other policy to disable that setting (though i already had this - so i don't know why it wasn't overriding the setting - ah well another day) - logged on and away it went - so i think the original policy was stopping the 2nd policy from being applied properly...
gotta love w2k! ;-)
|
|
Top
|
|
|
|
|
#24452 - 2002-07-10 09:28 PM
Re: batch file not executing under w2k
|
Dwayne
Fresh Scripter
Registered: 2002-07-05
Posts: 6
|
Hey Guys,
Thought i'd better make myself a bit clearer! It doesn't really matter whether the run logonscripts synchronously is enabled or not in the policy i am using to push it out - what *was* the problem was the other policy i had applied to that OU (the first one) which had enabled the logonscripts bit - for some reason the first policy stopped the script in the second policy from working correctly - i reset the first policy (since it didn't need to be on - this is just a Test OU i use to test these sorts of things!) and now it doesn't matter how the second policy is set - the script works fine either way - now i just need to figure out a way to get the user to wait for the install to finish :-)
|
|
Top
|
|
|
|
Moderator: Jochen, Allen, Radimus, Glenn Barnas, ShaneEP, Ruud van Velsen, Arend_, Mart
|
1 registered
(Allen)
and 566 anonymous users online.
|
|
|
![[Big Grin]](images/icons/grin.gif){kind=icon}
