; Sample PRF file for creating Outlook profiles in Corporate or Workgroup configuration
; -------------------------------------------------------------------------------------
; Copyright (C), Microsoft Corporation, 1997-1999.
;
; The following PRF file is included as an example of how to create a PRF file that will
; configure a profile with the following services: Microsoft Exchange Server, Outlook
; Address Book, Personal Folders, and Internet E-mail (POP3). Sections 1 through 5 may
; be modified; DO NOT MODIFY SECTIONS 6 and 7. It will most likely prevent the profile
; from being properly created Be very careful when editing to ensure property values
; match their property types.

; Note that sections 2 and 3 are similar. Section 2 determines the kind and number
; of MAPI services, while section 3 determines the number of accounts. Sections 4 and
; 5 are also similar. Section 4 determines specific settings for each MAPI service,
; while section 5 determines specific settings for Internet Accounts. Finally, sections
; 6 and 7 are also similar; they display the possible settings for MAPI services and
; Internet Accounts, respectively.


; ************************************************************************
; Section 1 - Profile defaults.
; ************************************************************************

[General]
Custom=1
; -- Required. Indicates that this is a customized PRF file.
ProfileName=Microsoft Outlook
DefaultProfile=Yes
OverwriteProfile=Yes
DefaultStore=Service2

; ************************************************************************
; Section 2 - Services in profile.
; ************************************************************************
; The list of MAPI services that will be added to the profile.

[Service List]
Service1=Microsoft Outlook Client
Service2=Microsoft Exchange Server
;Service3=Outlook Address Book
;Service4=Personal Folders
;Service5=Internet E-mail
; If you add an Internet E-mail service, you also have to add an Account in
; section 3.

; ************************************************************************
; Section 3 - List of internet accounts.
;*******************************************************************
; The list of accounts that will be created.

[Internet Account List]
Account1=I_Mail

; ************************************************************************
; Section 4 - Default values for each service.
; ************************************************************************

[Service1]
; No settings configured.

[Service2]
ConversionProhibited=TRUE
HomeServer=TestExchange
; Required.
; -- The name of the Microsoft Exchange Server the user should
; connect to. You can specify any Microsoft Exchange Server
; in your site, and the correct Home Server will be assigned
; when the user first logs on.

[Service3]
Ben=TRUE
; -- Dummy property. Do not delete or modify.

[Service4]
PathToPersonalFolders=c:\outlook.pst
; The directories in the path to the personal folders must already exist

[Service5]
AccountName=PopAccount
' The AccountName has to match the Account name in Section 5.
LongAccountName=Internet E-mail - PopAccount
; The LongAccountName always has to be "Internet E-mail -" + <space> + AccountName

; ************************************************************************
; Section 5 - Values for each internet account.
; *******************************************************************
; The settings for each account that will be created. The available
; account settings are listed in Section 3, below.

[Account1]
; This is an example of a POP3 account
AccountName=PopAccount
ConnectionType=1
POP3Server=MyPOPServer
SMTPDisplayName=Someone
SMTPEmailAddress=someone@microsoft.com
SMTPOrgName=Personal
SMTPServer=MySMTPServer

; ************************************************************************
; Section 6 - Mapping for profile properties. DO NOT MODIFY.
; ************************************************************************

; ************************************************************************
; Outlook settings stored in the profile
[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046

FormDirectoryPage=PT_STRING8,0x0270
; -- The URL of Exchange Web Services Form Directory page used to
; create Web forms.

WebServicesLocation=PT_STRING8,0x0271
; -- The URL of Exchange Web Services page used to display
; unknown forms.

ComposeWithWebServices=PT_BOOLEAN,0x0272
; -- Set to TRUE to use Exchange Web Services to compose forms.

PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
; -- Set to TRUE to use Exchange Web Services to display unknown
; forms.

OpenWithWebServices=PT_BOOLEAN,0x0274
; -- Set to TRUE to prompt user before opening unknown forms when
; using Exchange Web Services.

; ************************************************************************
; Microsoft Exchange Server service definitions.
[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517

MailboxName=PT_STRING8,0x6607
; -- The name of the user's Exchange Server Mailbox

HomeServer=PT_STRING8,0x6608
; -- The name of the Microsoft Exchange Server the user should
; connect to. You can specify any Microsoft Exchange Server
; in your site, and the correct Home Server will be assigned
; when the user first logs on.

OfflineFolderPath=PT_STRING8,0x6610
; -- The path to the Offline Store File that contains
; local replicas of the user's Mailbox and Favorites.
; If you do not specify a value, no Offline Store will
; be created. If you specify a path, an Offline Store
; will be created and the Inbox, Outbox, Deleted Items,
; and Sent Items folders will be replicated to it.

OfflineAddressBookPath=PT_STRING8,0x660E
; -- The path to the directory to store offline address
; book files in.

ExchangeConfigFlags=PT_LONG,0x6601
; -- Behavior when connecting to the Exchange Server.
; 32 - Auto detect online/offline connection state (default)
; 48 - Always connect online
; 50 - Prompt user for online or offline connection

ConversionProhibited=PT_BOOLEAN,0x3A03
; -- A boolean value indicating whether NEWPROF should
; attempt to resolve the Exchange mailbox name at run time.
; If set to TRUE, NEWPROF will copy the name to the profile
; without resolving it.
; If FALSE, the name will be resolved. Invalid server or
; mailbox name will not be copied to the profile.

; ************************************************************************
; Microsoft Mail service definitions.
[Microsoft Mail]
ServiceName=MSFS

ServerPath=PT_STRING8,0x6600
; -- The path to the users post office. Mapped network drives, UNC and NETWARE paths
; are acceptable. NETWARE paths of the type NWServer/share:dir\dir1 are converted to
; UNC paths of the type \\NWServer\share\dir\dir1.

Mailbox=PT_STRING8,0x6601
; -- The users mailbox name. eg. in a NET/PO/USER address,
; this is USER. The maximum mailbox name is 10 characters.

Password=PT_STRING8,0x67f0
; -- The users mailbox password. The maximum password is 8 characters.

RememberPassword=PT_BOOLEAN,0x6606
; -- A boolean value indicating whether the users password is
; to be remembered in the profile or not. This is useful because
; if the password is remembered the user can bypass the logon prompt
; if his server path, mailbox name and password are all supplied.

ConnectionType=PT_LONG,0x6603
; -- The connection type. This may be one of CFG_CONN_AUTO, CFG_CONN_LAN,
; CFG_CONN_REMOTE, CFG_CONN_OFFLINE as defined below.
;
; 0x0 -- LAN type connection. Used to connect to the post office using a
; UNC path or pre-existing mapped drive.
; 0x1 -- Dial up connection using Dial-up Networking.
; 0x2 -- Not connected.
; 0x3 -- Automatically detect whether the connection type is LAN or REMOTE.
; This connection type is only available on Win95.

UseSessionLog=PT_BOOLEAN,0x6604
; -- A boolean value indicating whether session logging
; is on or off.

SessionLogPath=PT_STRING8,0x6605
; -- The path to the session log file.

EnableUpload=PT_BOOLEAN,0x6620
; -- A boolean value which indicates whether mail in the outbox
; is sent.

EnableDownload=PT_BOOLEAN,0x6621
; -- A boolean value which indicates whether mail in the server
; mailbag is downloaded.

UploadMask=PT_LONG,0x6622
; -- A bit array which allows the user to indicate which addresses
; for which the transport is to attempt delivery. This is useful
; in order to allow a user to specify that a transport only handle
; delivery for a subset of the addresses it can really process.
; When multiple transports are installed and the user wants a
; different transport to handle some specific address types they
; can use this bit array to specify that the MSMAIL transport
; only handle a specific set of addresses.
;
; Possible values as defined below include:
;
; 0x00000001 -- Local Post Office and External Post Office address types
; 0x00000002 -- PROFS address types
; 0x00000004 -- SNADS address types
; 0x00000008 -- MCI address types
; 0x00000010 -- X.400 address types
; 0x00000040 -- FAX address types
; 0x00000080 -- MHS address types
; 0x00000100 -- SMTP address types
; 0x00000800 -- OfficeVision address types
; 0x00001000 -- MacMail address types
; 0x000019df -- All of the above address types

NetBiosNotification=PT_BOOLEAN,0x6623
; -- A boolean value which indicates whether a netbios notification
; is sent to a recipients transport when mail is delivered to
; their server inbox.

NewMailPollInterval=PT_STRING8,0x6624
; -- The polling interval in minutes when the transport
; checks for new mail. 1 <= polling interval <= 9999

DisplayGalOnly=PT_BOOLEAN,0x6625
; -- A boolean value which, if TRUE, only displays the Microsoft Mail Global Address
; list for name selection. The Postoffice list, external post office lists, and gateway
; address lists are not shown.

UseHeadersOnLAN=PT_BOOLEAN,0x6630
; -- A boolean value which indicates whether the user wants to enable
; headers while working on the LAN. Headers mode allows the user
; to download message headers and selectively choose which mail
; to download.

UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
; -- A boolean value which indicates whether the user wants to use
; name resolution based on a local copy of the server address book
; rather than the server address book itself.

UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
; -- A boolean value which indicates whether EXTERNAL.EXE, a server process, should be used
; to deliver submitted mail messages. This is sometimes useful when mail is running
; on a slow LAN connection.

UseHeadersOnRAS=PT_BOOLEAN,0x6640
; -- A boolean value which indicates whether the user wants to enable
; headers while working over a slow speed link. Headers mode
; allows the user to download message headers and selectively
; choose which mail to download.

UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
; -- A boolean value which indicates whether the user wants to use
; name resolution based on a local copy of the server address book
; rather than the server address book itself.

UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
; -- A boolean value which indicates whether EXTERNAL.EXE, a server process, should be used
; to deliver submitted mail messages. This speeds up message delivery when mail is
; running on a Dial-up network connection.

ConnectOnStartup=PT_BOOLEAN,0x6642
; -- A boolean value which indicates that a Dial-up Network connection should
; be established when the transport provider starts up.

DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated when headers are finished downloading.

DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated after mail has finished being sent
; received.

DisconnectOnExit=PT_BOOLEAN,0x6645
; -- A boolean value which indicates that a Dial-up Network connection should
; be automatically terminated when the provider is exited.

DefaultDialupConnectionName=PT_STRING8,0x6646
; -- The name of the Dial-up Network profile that the transport will use by
; default to attempt the connection.

DialupRetryCount=PT_STRING8,0x6648
; -- Number of times to attempt dial for connection.
; 1 <= retry attempts <= 9999

DialupRetryDelay=PT_STRING8,0x6649
; -- Delay between retry attempts in seconds.
; 30 <= retry delay <= 9999

; ************************************************************************
; Personal Folders service definitions.

[Personal Folders]
ServiceName=MSPST MS

PathToPersonalFolders=PT_STRING8,0x6700
; -- Path to personal folders.

RememberPassword=PT_BOOLEAN,0x6701
; -- A boolean value that determines if the personal folders password
; should be cached.

EncryptionType=PT_LONG,0x6702
; -- A value that designates the type of encryption that is used to
; compress the data in the PST:
;
; No Encryption 0x80000000
; Compressable Encryption 0x40000000
; Best Encryption 0x20000000

Password=PT_STRING8,0x6703
; -- PST password.

; ************************************************************************
; Outlook Address Book service definitions.

[Outlook Address Book]
ServiceName=CONTAB
Ben=PT_STRING8,0x6700
; -- Dummy property. Do not modify.

; ************************************************************************
; Microsoft LDAP Directory service definitions.
[Microsoft LDAP Directory]
ServiceName=EMABLT

LDAPServer=PT_STRING8,0x6600
; -- This is the IP address or host name of the machine containing
; the LDAP server.

LDAPServerPort=PT_STRING8,0x6601
; -- The port number that the LDAP server is listening on.

UserName=PT_STRING8,0x6602
; -- Enter the user's name. This value is not required if you allow
; anonymous binds.

SearchBase=PT_STRING8,0x6603
; -- The Search Base (e.g. o=microsoft, c=US).

SearchFilter=PT_STRING8,0x6604
; -- The Search Filter in RFC1777 format with %s allowed as a
; substitution token for the name to be searched for. For example,
; (|(cn=*%s*)(sn=*%s*)) can be used to perform a search on common name
; or surname.

MAPIAddressType=PT_STRING8,0x6605
; -- The address type to be used by MAPI in message submission. For
; example, SMTP.

EMailAttribute=PT_STRING8,0x6606
; -- The E-Mail Attribute (e.g. mail, mhsOrAddresses or
; rfc822Mailbox), which is mapped to the MAPI PR_EMAIL_ADDRESS property.

LDAPTimeLimit=PT_STRING8,0x6607
; -- LDAP Time Limit for searching (in seconds). The maximum length of
; time to search the directory. A value of 0 means that the search will
; not be limited by time. Note that this will not necessarily supersede
; any system-wide limits defined on the server.

LDAPSizeLimit=PT_STRING8,0x6608
; -- LDAP Size limit for searching (in number of 'hits'). The maximum
; number of matches to return. A value of 0 means that there is no
; limit to the number of matches. Note that this will not necessarily
; supersede any system-wide limits defined on the server.

LDAPTimeLimitLowBand=PT_STRING8,0x6609
; -- Same as LDAP Time Limit, except for low bandwidth links.

LDAPSizeLimitLowBand=PT_STRING8,0x660a
; -- Same as LDAP Size Limit, except for low bandwidth links.

LogFilePath=PT_STRING8,0x660b
; -- Log File (full pathname).

ErrorLogging=PT_STRING8,0x660c
; -- Error Logging Levels , ON or OFF.

DisplayNameSource=PT_STRING8,0x6611
; -- Attribute to be used within the Internet Directory entry for
; populating the user Display Name.

DisplayFailDialog=PT_STRING8,0x6612
; -- Attribute to determine if a dialog will be displayed when a search
; to the Internet Directory fails. The dialog will display additional
; information. Values can be either 1 (display) or 0 (do not display).

[Internet E-Mail]
; If you configure an Internet E-mail service, then you also need to add
; information in section 5.

ServiceName=IMAIL
; When creating an Internet E-Mail service, both AccountName and
; LongAccountName MUST BE specified!

AccountName=PT_STRING8,0x661f
; This should be exactly the same as the I_Mail AccountName
; property.

LongAccountName=PT_STRING8,0x3001
; This should be the "Internet E-mail - " + the AccountName
; property. For example, if AccountName="foo", then this
; should be "Internet E-mail - foo".

; ************************************************************************
; Section 7 - Mapping for internet account properties. DO NOT MODIFY.
; ************************************************************************

; Internet E-Mail service Settings/Definitions
; In a Corporate or Workgroup configuration, the only type of account that
; can be created is an I_MAIL (POP3) account. You can use settings from
; the [I_Mail] section below.
;

[I_Mail]
; *****************************
; *** Mail Account Settings ***
; *****************************
; Configurable settings for POP3 (Corporate and Intenet Only configs)
; and IMAP (Internet Only config only) mail accounts

AccountName=PT_STRING8,0x1235
; The name of the account that appears in the Account List.

ConnectionType=PT_DWORD,0x1239
; Values:
; 0 = Connect using local area network (LAN).
; 1 = Connect using Internet Explorer's or a 3rd party dialer.
; 2 = Connect using modem and the Dial-up Networking connection
; specified in the Connectoid property.

Connectoid=PT_STRING8,0x123A
; Specify the existing Dial-up Networking connection to use.

; -----------------------------
; --- POP3 Account Settings ---
; -----------------------------

POP3Server=PT_STRING8,0x13C4
; Specifies the name of the POP3 server used for incoming messages.

POP3UseSicily=PT_BOOLEAN,0x13C8
; Set to 1 if you want to use Secure Password Authentication to logon
; to the POP3 server.

POP3LogonName=PT_STRING8,0x13C5
; If POP3UseSicily is turned on, this sets the name used to logon
; to the POP3 server.

POP3Port=PT_DWORD,0x13C9
; Specfies the port number used to connect to the POP3 server.

POP3SSL=PT_BOOLEAN,0x13CA
; Set to 1 to use the SSL (Secure Sockets Layer) security protocal to
; connect to the POP3 server.

POP3TimeOut=PT_DWORD,0x13CB
; Specifies how long to wait for a response for the server before
; stopping to attempt to send or receive messages. Possible values:
; 30 = 30 seconds
; 60 = 1 minute
; 90 = 1 minute 30 seconds
; 120 = 2 minutes
; 150 = 2 minutes 30 seconds
; 180 = 3 minutes
; 210 = 3 minutes 30 seconds
; 240 = 4 minutes
; 270 = 4 minutes 30 seconds
; 300 = 5 minutes

POP3LeaveOnServer=PT_BOOLEAN,0x13CC
; Set to 1 to store a copy of all sent and received messages on the
; POP3 server.

POP3RemoveExpired=PT_BOOLEAN,0x13CE
; If POP3LeaveOnServer is turned on, set to 1 to delete messages on
; the server after a specific number of days (see also
; POP3ExpireDays).

POP3ExpireDays=PT_DWORD,0x13CF
; If POP3LeaveOnServer and POP3RemoveExpired are turned on, sets
; the number of days after which messages left on the server will
; be deleted.

POP3RemoveDeleted=PT_BOOLEAN,0x13CD
; This property is only supported on Outlook 98 (8.5)or higher! If
; you try to use it on Outlook 97 (8.0x) the account will not be
; created.
; If POP3LeaveOnServer is turned on, set to 1 to delete a message
; from the server when the message is deleted from the Deleted
; Items folder on the local machine.

; -----------------------------
; --- SMTP Account Settings ---
; -----------------------------

SMTPServer=PT_STRING8,0x1428
; Specifies the name of the SMTP server used for outcoming messages.

SMTPUseSicily=PT_DWORD,0x142C
; Values:
; 0 = No server authentication required.
; 1 = Use Secure Password Authentication, or set SMTP server logon
; name using SMTPLogonName.

SMTPLogonName=PT_STRING8,0x1429
; If SMTPUseSicily is set to 1, this sets the name used to logon to
; the SMTP server.

SMTPPort=PT_DWORD,0x142D
; Specfies the port number used to connect to the SMTP server.

SMTPSSL=PT_BOOLEAN,0x142E
; Set to 1 to use the SSL (Secure Sockets Layer) security protocal to
; connect to the SMTP server.

SMTPTimeOut=PT_DWORD,0x142F
; Specifies how long to wait for a response for the server before
; stopping to attempt to send or receive mail messages. Values are
; the same as POP3TimeOut.

SMTPDisplayName=PT_STRING8,0x1430
; Specifies the "friendly" name associated with the email address.

SMTPOrgName=PT_STRING8,0x1431
; Specifies the group or organization.

SMTPEmailAddress=PT_STRING8,0x1432
; Specifies the email address. Must be in the format name@company

SMTPReplyAddress=PT_STRING8,0x1433
; Specifies that replies to outgoing email should be sent to this
; email address.

SMTPSplitMessages=PT_BOOLEAN,0x1434
; This property is only supported on Outlook 98 (8.5) or higher! If
; you try to use it on Outlook 97 (8.0x) the account will not be
; created.
; Set to 1 to break up outgoing messages, so that each message is
; smaller than the file size indicated by SMTPSplitSize.

SMTPSplitSize=PT_DWORD,0x1435
; The maximum size, in KB, of a piece of a split message.

....
Do you know how you have solved this issue on the XP machines ?

Hmm, i have also installed a testmachine with XP (SP2) and outlook 2003.
But there the first method you gave also doesn't work ....
....

....
I'll try to find some time to setup a workstation with Win2K and Office 2K and do some test on that.
....

start \\2003dc2\netlogon\Newprof.exe -p \\2003dc2\netlogon\outlook.prf

;Automatically generated PRF file from the Microsoft Office Customization and Installation Wizard

; **************************************************************
; Section 1 - Profile Defaults
; **************************************************************

[General]
Custom=1
ProfileName=My Outlook Profile
DefaultProfile=Yes
OverwriteProfile=Yes
ModifyDefaultProfileIfPresent=FALSE

; **************************************************************
; Section 2 - Services in Profile
; **************************************************************

[Service List]
;ServiceX=Microsoft Outlook Client
Service1=Outlook Address Book

;***************************************************************
; Section 3 - List of internet accounts
;***************************************************************

[Internet Account List]
Account1=I_Mail
Account2=IMAP_I_Mail
Account3=INET_HTTP

;***************************************************************
; Section 4 - Default values for each service.
;***************************************************************

;[ServiceX]


[Service1]

;FormDirectoryPage=
;-- The URL of Exchange Web Services Form Directory page used to create Web forms.
;WebServicesLocation=
;-- The URL of Exchange Web Services page used to display unknown forms.
;ComposeWithWebServices=
;-- Set to TRUE to use Exchange Web Services to compose forms.
;PromptWhenUsingWebServices=
;-- Set to TRUE to use Exchange Web Services to display unknown forms.
;OpenWithWebServices=
;-- Set to TRUE to prompt user before opening unknown forms when using Exchange Web Services.


;***************************************************************
; Section 5 - Values for each internet account.
;***************************************************************

[Account1]
UniqueService=No
AccountName=Outlook Tips POP3
POP3Server=mail.outlook-tips.net
SMTPServer=mail.outlook-tips.net
POP3UserName=outlookt
EmailAddress=tips@outlook-tips.net
POP3UseSPA=0
DisplayName=
ReplyEMailAddress=
SMTPUseAuth=1
SMTPAuthMethod=0
ConnectionType=0
LeaveOnServer=0x0
ConnectionOID=MyConnection
POP3Port=110
POP3UseSSL=0
ServerTimeOut=60
SMTPPort=25
SMTPUseSSL=0

[Account2]
UniqueService=No
AccountName=AOL-IMAP
IMAPServer=imap.aol.com
SMTPServer=smtp.aol.com
IMAPUserName=poremsky
EmailAddress=poremsky@aol.com
IMAPUseSPA=0
DisplayName=
ReplyEMailAddress=
SMTPUseAuth=1
SMTPAuthMethod=0
ConnectionType=0
RootFolder=
ConnectionOID=MyConnection
IMAPPort=143
IMAPUseSSL=0
ServerTimeOut=60
SMTPPort=587
SMTPUseSSL=0

[Account3]
UniqueService=No
HttpServer=http://services.msn.com/svcs/hotmail/httpmail.asp
UserName=poremsky@hotmail.com
Organization=
Reply=
Account=Poremsky-Hotmail
EmailAddress=poremsky@hotmail.com
FullName=Diane Poremsky
Connection Type=0
ConnectOID=

;***************************************************************
; Section 6 - Mapping for profile properties
;***************************************************************

[Microsoft Exchange Server]
ServiceName=MSEMS
MDBGUID=5494A1C0297F101BA58708002B2A2517
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
OfflineAddressBookPath=PT_STRING8,0x660E
OfflineFolderPath=PT_STRING8,0x6610

[Exchange Global Section]
SectionGUID=13dbb0c8aa05101a9bb000aa002fc45a
MailboxName=PT_STRING8,0x6607
HomeServer=PT_STRING8,0x6608
RPCoverHTTPflags=PT_LONG,0x6623
RPCProxyServer=PT_UNICODE,0x6622
RPCProxyPrincipalName=PT_UNICODE,0x6625
RPCProxyAuthScheme=PT_LONG,0x6627
CachedExchangeConfigFlags=PT_LONG,0x6629

[Microsoft Mail]
ServiceName=MSFS
ServerPath=PT_STRING8,0x6600
Mailbox=PT_STRING8,0x6601
Password=PT_STRING8,0x67f0
RememberPassword=PT_BOOLEAN,0x6606
ConnectionType=PT_LONG,0x6603
UseSessionLog=PT_BOOLEAN,0x6604
SessionLogPath=PT_STRING8,0x6605
EnableUpload=PT_BOOLEAN,0x6620
EnableDownload=PT_BOOLEAN,0x6621
UploadMask=PT_LONG,0x6622
NetBiosNotification=PT_BOOLEAN,0x6623
NewMailPollInterval=PT_STRING8,0x6624
DisplayGalOnly=PT_BOOLEAN,0x6625
UseHeadersOnLAN=PT_BOOLEAN,0x6630
UseLocalAdressBookOnLAN=PT_BOOLEAN,0x6631
UseExternalToHelpDeliverOnLAN=PT_BOOLEAN,0x6632
UseHeadersOnRAS=PT_BOOLEAN,0x6640
UseLocalAdressBookOnRAS=PT_BOOLEAN,0x6641
UseExternalToHelpDeliverOnRAS=PT_BOOLEAN,0x6639
ConnectOnStartup=PT_BOOLEAN,0x6642
DisconnectAfterRetrieveHeaders=PT_BOOLEAN,0x6643
DisconnectAfterRetrieveMail=PT_BOOLEAN,0x6644
DisconnectOnExit=PT_BOOLEAN,0x6645
DefaultDialupConnectionName=PT_STRING8,0x6646
DialupRetryCount=PT_STRING8,0x6648
DialupRetryDelay=PT_STRING8,0x6649

[Personal Folders]
ServiceName=MSPST MS
Name=PT_STRING8,0x3001
PathToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703

[Unicode Personal Folders]
ServiceName=MSUPST MS
Name=PT_UNICODE,0x3001
PathToPersonalFolders=PT_STRING8,0x6700
RememberPassword=PT_BOOLEAN,0x6701
EncryptionType=PT_LONG,0x6702
Password=PT_STRING8,0x6703

[Outlook Address Book]
ServiceName=CONTAB

[LDAP Directory]
ServiceName=EMABLT
ServerName=PT_STRING8,0x6600
UserName=PT_STRING8,0x6602
UseSSL=PT_BOOLEAN,0x6613
UseSPA=PT_BOOLEAN,0x6615
DisableVLV=PT_LONG,0x6616
DisplayName=PT_STRING8,0x3001
ConnectionPort=PT_STRING8,0x6601
SearchTimeout=PT_STRING8,0x6607
MaxEntriesReturned=PT_STRING8,0x6608
SearchBase=PT_STRING8,0x6603

[Microsoft Outlook Client]
SectionGUID=0a0d020000000000c000000000000046
FormDirectoryPage=PT_STRING8,0x0270
WebServicesLocation=PT_STRING8,0x0271
ComposeWithWebServices=PT_BOOLEAN,0x0272
PromptWhenUsingWebServices=PT_BOOLEAN,0x0273
OpenWithWebServices=PT_BOOLEAN,0x0274
CachedExchangeMode=PT_LONG,0x041f
CachedExchangeSlowDetect=PT_BOOLEAN,0x0420

[Personal Address Book]
ServiceName=MSPST AB
NameOfPAB=PT_STRING8,0x001e3001
Path=PT_STRING8,0x001e6600
ShowNamesBy=PT_LONG,0x00036601

; ************************************************************************
; Section 7 - Mapping for internet account properties. DO NOT MODIFY.
; ************************************************************************

[I_Mail]
AccountType=POP3
;--- POP3 Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- POP3 Account Settings ---
POP3Server=PT_UNICODE,0x0100
POP3UserName=PT_UNICODE,0x0101
POP3UseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
POP3Port=PT_LONG,0x0104
POP3UseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPUseSSL=PT_LONG,0x0202
ServerTimeOut=PT_LONG,0x0209
LeaveOnServer=PT_LONG,0x1000

[IMAP_I_Mail]
AccountType=IMAP
;--- IMAP Account Settings ---
AccountName=PT_UNICODE,0x0002
DisplayName=PT_UNICODE,0x000B
EmailAddress=PT_UNICODE,0x000C
;--- IMAP Account Settings ---
IMAPServer=PT_UNICODE,0x0100
IMAPUserName=PT_UNICODE,0x0101
IMAPUseSPA=PT_LONG,0x0108
Organization=PT_UNICODE,0x0107
ReplyEmailAddress=PT_UNICODE,0x0103
IMAPPort=PT_LONG,0x0104
IMAPUseSSL=PT_LONG,0x0105
; --- SMTP Account Settings ---
SMTPServer=PT_UNICODE,0x0200
SMTPUseAuth=PT_LONG,0x0203
SMTPAuthMethod=PT_LONG,0x0208
SMTPUserName=PT_UNICODE,0x0204
SMTPUseSPA=PT_LONG,0x0207
ConnectionType=PT_LONG,0x000F
ConnectionOID=PT_UNICODE,0x0010
SMTPPort=PT_LONG,0x0201
SMTPUseSSL=PT_LONG,0x0202
ServerTimeOut=PT_LONG,0x0209
CheckNewImap=PT_LONG,0x1100
RootFolder=PT_UNICODE,0x1101

[INET_HTTP]
AccountType=HOTMAIL
Account=PT_UNICODE,0x0002
HttpServer=PT_UNICODE,0x0100
UserName=PT_UNICODE,0x0101
Organization=PT_UNICODE,0x0107
UseSPA=PT_LONG,0x0108
TimeOut=PT_LONG,0x0209
Reply=PT_UNICODE,0x0103
EmailAddress=PT_UNICODE,0x000C
FullName=PT_UNICODE,0x000B
Connection Type=PT_LONG,0x000F
ConnectOID=PT_UNICODE,0x0010