cdburn, howto burn raw image? - KiXtart.org - official site

You are not logged in. [Log In] KiXtart.org website » Forums » KiXtart » Lounge » cdburn, howto burn raw image?

Page 1 of 2

1

Topic Options

#131424 - 2004-12-16 03:03 PM cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	as discussed in: http://www.kixtart.org/ubbthreads/showflat.php?Cat=&Board=UBB14&Number=127279&Forum=UBB14 MS gave out the cdburner in a reskit, and lo, it's nice. but problem is, I can't make it to burn anything. I have made a RAW cd image (iso/bin) of my xp cd (to keep it bootable) and all the burner does it say: "can't verify image file" wtf? _________________________ ! download KiXnet
Top

#131425 - 2004-12-16 03:25 PM Re: cdburn, howto burn raw image?
gregglsc gregglsc Fresh Scripter Registered: 2000-11-16 Posts: 21 Loc: USA	Try http://www.daemon-tools.cc/dtcc/portal/download.php?mode=ViewCategory&catid=5 Use can use this to mount the image to a drive letter to check it. Also in the CDRTools package (available on the web) is ISODUMP.EXE that will let you examine the iso file. Gregg
Top

#131426 - 2004-12-16 03:51 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	the problem is that I don't want to dumb it nor I don't want to view it. I have full isobuster so surely I can view it when I want and dumb or extract stuff if I want. but I don't. as explained above, I want to keep the CD intact. I wanna have a perfect backup copy of the cd on HD and I want to be able to BURN that backup IMAGE. now, if I would extract the data, and burn it, it would not be the same cd anymore. nor, viewing the image with daemontools will not burn it for me. _________________________ ! download KiXnet
Top

#131427 - 2004-12-16 03:59 PM Re: cdburn, howto burn raw image?
Radimus Radimus Moderator Registered: 2000-01-06 Posts: 5187 Loc: Tampa, FL	Drop.ISO.on.me.to.burn.CD.cmd Code: @echo off for /F "usebackq" %%i in (`"\\wheelerc\shared\findcd.com -a"`) do set CD=%%i: \\wheelerc\shared\cdburn %cd% %1 \\wheelerc\shared\cdr open %cd% echo done pause _________________________ How to ask questions the smart way <-----------> Before you ask
Top

#131428 - 2004-12-16 04:03 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	ja, that's the iso image burn stuff from the other thread. but it's just same as saying on commandline "cdburn drive imagename" sorry. kinda stupid this sounds... there are the methods (well, like MS said, this tool supports raw-images) but nobody really explains them. I start to think that what that raw means is image that contains only cd-data in raw format. not a real raw image. _________________________ ! download KiXnet
Top

#131429 - 2004-12-16 04:04 PM Re: cdburn, howto burn raw image?
Radimus Radimus Moderator Registered: 2000-01-06 Posts: 5187 Loc: Tampa, FL	if you want a freeware 'nero-like' tool, look at CDBurnerXP http://www.cdburnerxp.se/ _________________________ How to ask questions the smart way <-----------> Before you ask
Top

#131430 - 2004-12-16 04:30 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	ok, went on and tested, cdburn can't burn raw tracks either. wonder, read somewhere that roxio burner can't handle raw at all but needs TAO... could this be the limit with MS products too... thanks for the link rad. will check on it. what I actually want is to have a tool that can write images. nero and easyCDcreator both are buggy on that part but keep finding no good alternatives. _________________________ ! download KiXnet
Top

#131431 - 2004-12-16 04:35 PM Re: cdburn, howto burn raw image?
AzzerShaw AzzerShaw Seasoned Scripter Registered: 2003-02-20 Posts: 510 Loc: Cheltenham, England	i use this for dvds and its brilliant. Cant remember though if it does cd tho... http://www.dvddecrypter.com/ _________________________ If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it. - W.C Fields
Top

#131432 - 2004-12-16 04:37 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	k, neither CDburnXP could burn raw iso-image. _________________________ ! download KiXnet
Top

#131433 - 2004-12-16 04:54 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	to explain my problem more, check this: http://www.daemon-tools.cc/dtcc/portal/daemonhelp.php?helppage=18#1to1copy _________________________ ! download KiXnet
Top

#131434 - 2004-12-16 04:57 PM Re: cdburn, howto burn raw image?
Radimus Radimus Moderator Registered: 2000-01-06 Posts: 5187 Loc: Tampa, FL	ok... perhaps your problem is that you need to choose a different method to create your ISO If you are trying to include some form of copy protection, look into fireburner _________________________ How to ask questions the smart way <-----------> Before you ask
Top

#131435 - 2004-12-16 05:22 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	ja. my image may contain way too much data. say, I was able to burn with cloneCD but the outcome was 0 byte disc looking at the disc at isobuster reavealed that cloneCD only burned the track info, not the data itself _________________________ ! download KiXnet
Top

#131436 - 2004-12-16 05:39 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	k, asked this from "the source of my confusion" that is ISOBuster guru, Peter Van Hove. and indeed, there seems to be "two levels" of raw. Quote: I come from the CD/DVD Drive industry and I'm familiar with low level stuff where there is NO use of file-systems and the lot. When a host (software) reads data, that data is either read as "user data" or "raw". There are distinct different methods of reading the data and the data returned and that is stored in the file is different. Now, on a much higher level, the file-system level, I can imagine that people make a distinction between just the file-data (user data) and the complete data from start till end containing also the file-system information (which would then be raw, where in fact this is still simply user data on drive level) _________________________ ! download KiXnet
Top

#131437 - 2004-12-16 10:56 PM Re: cdburn, howto burn raw image?
NTDOC NTDOC Administrator Registered: 2000-07-28 Posts: 11624 Loc: CA	Quote: I have made a RAW cd image (iso/bin) of my xp cd (to keep it bootable) Jooel, Not sure what you're doing. Every CD burning program I can think of can easily burn the original XP CD and keep it bootable. As far as I can tell there was no protection methods on the Enterprise CD. (don't know about the Retail version) However, if you allow CloneCD to copy the CD and create an image of it, it will burn a copy for you and keep another image on the Hard Drive. Unless you're just determined to do it with some specific method, this will work. I've done it many times. I can go burn a copy right now and put it in a new Computer with an unformatted hard drive and it will boot from the CD and install XP on the system.
Top

#131438 - 2004-12-16 11:17 PM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	sure. that's not the issue. the issue was that there was no specification which type of image the ISO image needs to be for cd writing softwares to write it. _________________________ ! download KiXnet
Top

#131439 - 2004-12-17 12:12 AM Re: cdburn, howto burn raw image?
NTDOC NTDOC Administrator Registered: 2000-07-28 Posts: 11624 Loc: CA	Well if it's just specs or other information you're looking for then hopefully these links will keep you busy reading for a while. CD-Recordable FAQ http://www.cdrfaq.org/ http://www.cdrfaq.org/faq02.html#S2-28 http://www.disctronics.co.uk/technology/cd-rom/cdrom_spec.htm http://www.disctronics.co.uk/downloads/downloads_dvd.htm “El Torito” Bootable CD-ROM Format Specification http://www.phoenix.com/NR/rdonlyres/98D3219C-9CC9-4DF5-B496-A286D893E36A/0/specscdrom.pdf Filesystems HOWTO http://www.fifi.org/doc/HOWTO/en-html/Filesystems-HOWTO.html Introduction to ISO 9660 http://www.mp3ar.com/Literature/iso9660.pdf Joliet Specification CD-ROM Recording Spec ISO 9660:1988 http://bmrc.berkeley.edu/people/chaffee/jolspec.html UDF Whitepaper http://www.softarch.com/us/dvd/UDF_whitepaper.pdf ISO9660 Simplified for DOS/Windows http://pauillac.inria.fr/~lang/hotlist/cdrom/Documents/iso-dos.txt CDROM GUIDE http://www.cdrom-guide.com/
Top

#131440 - 2004-12-17 10:50 AM Re: cdburn, howto burn raw image?
Lonkero Lonkero KiX Master Guru Registered: 2001-06-05 Posts: 22346 Loc: OK	the faq link was good. it just clearly said ppl are calling images ISO when in fact their images normally just are images of the iso-9660 filesystem, not CD images. _________________________ ! download KiXnet
Top

#131441 - 2004-12-17 02:33 PM Re: cdburn, howto burn raw image?
Kdyer Kdyer KiX Supporter Registered: 2001-01-03 Posts: 6241 Loc: Tigard, OR	Alcohol 120 Rocks! I have never had a problem with it and especially M$ CDs. Kent _________________________ Utilize these resources: UDFs (Full List) KiXtart FAQ & How to's
Top

#131442 - 2004-12-17 02:50 PM Re: cdburn, howto burn raw image?
MCA MCA KiX Supporter Registered: 2000-04-28 Posts: 5152 Loc: Netherlands, EU	Dear, First all kind of CD image which aren't ISO type will be converted to an ISO-type. ISO-type is much smaller as f.e. BIN-type. Secondly we make them with SoftDisc available when we don't burn them on a normal way on our CD/DVD. Third when we want to use the bootable capability we are using Nero or Easy CD Creator to burn them temporarily on a rewritable CD/DVD. Of course is can be necessary to keep your software up-to-date to manipulate recent images. F.e. the differences between Nero 5.x and 6.x is the way it can handle long filenames. greetings. _________________________ email scripting@wanadoo.nl homepage scripting@wanadoo.nl \| Links \| Summary of Site Site KiXforms FAQ kixtart.org library collection mirror MCA \| FAQ & UDF help file UDF kixtart.org library collection mirror MCA \| mirror USA \| mirror europe UDF scriptlogic library collection UDFs \| mirror MCA
Top

#131443 - 2004-12-17 03:21 PM Re: cdburn, howto burn raw image?
AzzerShaw AzzerShaw Seasoned Scripter Registered: 2003-02-20 Posts: 510 Loc: Cheltenham, England	Quote: Alcohol 120 Rocks Dont you have to pay for this though? _________________________ If at first you don't succeed, try again. Then quit. There's no use being a damn fool about it. - W.C Fields
Top

Page 1 of 2

1

Previous Topic

Previous Topic View All Topics

View All Topics

Index Next Topic

Next Topic

Moderator: Arend_, Allen, Jochen, Radimus, Glenn Barnas, ShaneEP, Ruud van Velsen, Mart

Hop to:

Shout Box

Who's Online

0 registered and 369 anonymous users online.

Newest Members

rrosell, PatrickPinto, Raoul, Timothy, Jojo67
17877 Registered Users

Generated in 0.078 seconds in which 0.027 seconds were spent on a total of 14 queries. Zlib compression enabled.

click tracking