InUse() - Function to remove in use files - KiXtart.org - official site

You are not logged in. [Log In] KiXtart.org website » Forums » KiXtart » Suggestions » InUse() - Function to remove in use files

Page 2 of 2

2

Topic Options

#116980 - 2006-01-14 01:58 PM Re: InUse() - Function to remove in use files
Sealeopard Sealeopard KiX Master Registered: 2001-04-25 Posts: 11164 Loc: Boston, MA, USA	Can somebody test whether MOVE /P will work if the source file resides on a share, UNC, or external drive like USB Stick? My gut feeling is that MOVE /P is designed to work with only local files. This should then be added to the documentation. My UDF that replaces in-use files is specifically coded to copy files to the local drive to take care of situations where the source file is remote. _________________________ There are two types of vessels, submarines and targets.
Top

#116981 - 2006-01-16 11:34 AM Re: InUse() - Function to remove in use files
NTDOC NTDOC Administrator Registered: 2000-07-28 Posts: 11624 Loc: CA	Don't need to Test. The files will only be removed from local device. The MOVE and DEL /P happen right after the AUTOCHECK routine which does not have access to any remote drives at that point in time. Possibly USB as long as it loads from BIOS and not by Windows drivers.
Top

#116982 - 2006-01-16 12:07 PM Re: InUse() - Function to remove in use files
NTDOC NTDOC Administrator Registered: 2000-07-28 Posts: 11624 Loc: CA	Okay I think the DEL is not correctly implmented on Windows 9x with the WININIT.INI file. An example entry after using is: [rename] C:\WINDOWS\Temporary Internet Files\Content.IE5\index.dat=NUL This is wrong for 2 reasons. 1. Long file names are not supported at that point in time 2. The DestinationFileName (in this case NUL) comes first not last Working example: [rename] NUL=C:\WINDOWS\TEMPOR~1\CONTENT.IE5\INDEX.DAT Further explanation can be found in this KB How To Move Files That Are Currently in Use http://support.microsoft.com/kb/140570 Quote: The syntax of the [rename] section is: DestinationFileName=SourceFileName DestinationFileName and SourceFileName must reside on the same volume and be short (8.3) file names because Wininit.ini is processed before the protected mode disk system is loaded, and long file names are only available when the protected mode disk system is running. Destination and source files specified in Wininit.ini with long file names are ignored.
Top

#116983 - 2006-01-16 12:34 PM Re: InUse() - Function to remove in use files
NTDOC NTDOC Administrator Registered: 2000-07-28 Posts: 11624 Loc: CA	Well actually I take back item 1 on long file names. That was due to my own coding and does not need to be part of KiX executable (unless Ruud wants to add ERROR code to trap when a Long Filename is being used on Windows 9x - otherwise disregard the report of this as an error in the program) The NUL though should be reversed to come first for deletes. I did not test the MOVE functionality on Windows 9x but would assume it has same issue.
Top

Page 2 of 2

2

Previous Topic

Previous Topic View All Topics

View All Topics

Index Next Topic

Next Topic

Moderator: Lonkero, ShaneEP, Jochen, Radimus, Glenn Barnas, Allen, Ruud van Velsen, Mart

Hop to:

Shout Box

Who's Online

0 registered and 761 anonymous users online.

Newest Members

Timothy, Jojo67, MaikSimon, kvn317, kixtarts2025
17874 Registered Users

Generated in 0.059 seconds in which 0.029 seconds were spent on a total of 12 queries. Zlib compression enabled.

click tracking